Skip to main content

Client Command (hmkdir)

The hmkdir command creates directories on the remote servers (server or hcpd server).

Basic Format#

The basic format is as follows.

Usage: hmkdir [OPTION]... [USER@]HOST[:PORT]:DIRECTORY [:DIRECTORY]...   or: hmkdir [OPTION]... --host=HOST [--port=PORT] [--user=USER] DIRECTORY...

Option List#

The options for the hmkdir commands are below.

Directory Creating

DescriptionShort NameOption Name
Set the flag to create parents directorypparents
Set the remote hosthost
Set the remote portport

Selectable Communication Method Function

DescriptionShort NameOption Name
The HpFP protocolhpfp
The WebSocket protocol(SSL/TLS)wss
The port-separation UDP(HpFP) protocol(deprecated)udp
The WebSocket protocol (plaintext communications)ws
Directly connect to the Proxy server when the WebSocket protocolws-proxy-direct
Set the Proxy server when the WebSocket protocolws-proxy

Congestion Control

DescriptionShort NameOption Name
Congestion control modes in the HpFP protocolhpfp-cong

Data Flow Control, Message Data Size Control

DescriptionShort NameOption Name
MSS(Maximum Segment Size) in the HpFP protocolhpfp-mss

Data Flow Control, Data Buffer Setting

DescriptionShort NameOption Name
Set the sending buffer size for the HpFP protocolhpfp-sndbuf
Set the receiving buffer size for the HpFP protocol

Authentication

DescriptionShort NameOption Name
Server certificate checking is disabled in WebSocket protocol communicationswss-no-check-certificate
Specify a username first and directory creatinguser
Specify a password first and directory creatingpassword

Various Monitorings

DescriptionShort NameOption Name
Investigation mode starts (deprecated)investigation

Log Management

DescriptionShort NameOption Name
Specify an application log output destinationlog-file
Specify various statistics log output destinationsstat-log-file
Specify an execution record output destinationhcp-out
Start in the multiple-run modemulti-run

Software Information Update

DescriptionShort NameOption Name
Check the application versionVversion
Check the configuration and input parametersconfig-test
Display the command helphhelp

System Operating Environment Settings

DescriptionShort NameOption Name
Setting form a path of the configuration fileconfig-file
Make configuration from command lineconfig-option
Setting by a relative path from the current directoryinclude-conf-from-cwd
Server compatibility disabledno-earlier-serv-compat

Please refer to the hcpd command section on the following option.

--investigation

Please refer to the hcp command section on the following option.

--hpfp, --wss, --user, --password, --config-file, --config-option, --log-file, --stat-log-file, --udp, --ws, --wss-no-check-certificate, --ws-proxy-direct, --ws-proxy, --hpfp-cong, --hpfp-mss, --hpfp-sndbuf, --hpfp-rcvbuf, --multi-run, --include-conf-from-cwd, --no-earlier-serv-compat

Directory Creating#

p, parents#

=========================================================================Supported OS : Linux / WindowsFormat : -p | --parents=========================================================================

If the parents directory is not found in the indicated path, the parent directory is also automatically created. Without this option, errors will happens when the parent directory dose not exist.

--Example:[user@localhost ~]$ hmkdir -p ...--

host#

=========================================================================Supported OS : Linux / WindowsFormat : --host=<remote-host>-------------------------------------------------------------------------remote-hostDefault : noneRange of Values : IP address or host name=========================================================================

The destination remote host is specified, which is applied to the path for the listed target. With this parameter, the host name can be abbreviated.

--Example:[user@localhost ~]$ hmkdir --host=192.168.100.100--

port#

=========================================================================Supported OS : Linux / WindowsFormat : --port=<remote-port>-------------------------------------------------------------------------remote-portDefault : noneRange of Values : port number=========================================================================

The destination remote port is specified, which is applied to the path for the listed target.

--Example:[user@localhost ~]$ hmkdir --port=1874--

Log Management#

hcp-out#

=========================================================================Supported OS : Linux / WindowsFormat : --hcp-out=<output-path>-------------------------------------------------------------------------output-pathDefault : noneRange of Values : path string of file system=========================================================================

The file to output the execution record of creating directories is set.

--Example:[user@localhost ~]$ hmkdir --hcp-out=- ...DIR0 127.0.0.1:1874:/home/user/Desktop/hcp_mkdir14DIR1 127.0.0.1:1874:/home/user/Desktop/hcp_mkdir15OK 0000 DC 00000001 /home/user/Desktop/hcp_mkdir14OK 0000 DC 00000002 /home/user/Desktop/hcp_mkdir15EXIT 0 REASON 0000[user@localhost ~]$ --
--Example:[user@localhost ~]$ hmkdir --hcp-out=- ...--

Software Information Update#

V, version#

=========================================================================Supported OS : Linux / WindowsFormat : -V | --version=========================================================================

Show the hmkdir command version.

--Example:[user@localhost ~]$ hmkdir -Vhmkdir client (hmkdir) 1.3.4_3 / Linux (HpFP2 2.0.0.91_21 WSAPI 0.0.1.30 WS 4.2.0-1)--

config-test#

=========================================================================Supported OS : Linux / WindowsFormat : --config-test=========================================================================

Display the input parameters for the hmkdir command and the configuration information.

--Example:[user@localhost ~]$ hmkdir --config-test...
Number of Logical Processors  : 2Number of Physical Processors : 2
Command parameters parents      : disable host     : disable port     : disable user           : disable password       : disable version        : disable help           : disable

Configuration parameters PubkeyAuthentication             : yes WinLogonUserAuthentication       : yes PAMAuthentication                : yes LocalPasswordAuthentication      : yes CompressLevel                    : -1 StrictHostKeyChecking            : ask PrivateKeyFile                   : - [~/.hcp/id_rsa] TransportTimeout                 : 180 AcceptableCryptMethod            : AES256/GCM AES256/CTR/VMAC AES256/CBC AES128/CBC [Intel:AES-NI=yes] AcceptableDigestMethod           : XXH3 MM128 SHA256 SHA160
Please type '--config-test --config-test ...' for more details.--

h, help#

=========================================================================Supported OS : Linux / WindowsFormat : -h | --help=========================================================================

Show the hmkdir command line help.

--Example:[user@localhost ~]$ hmkdir -h--