Skip to main content

Client Command (hpwd)

The hpwd command shows working directories on the remote server (server or hcpd server).

Basic Format#

The basic format is as follows.

Usage: hpwd [OPTION]... [USER@]HOST[:PORT]

Option List#

The options for the hpwd commands are below.

Showing the Current Working Directory

DescriptionShort NameOption Name
Logical pathLlogical
Physical pathPphysical

Selectable Communication Method Function

DescriptionShort NameOption Name
The HpFP protocolhpfp
The WebSocket protocol(SSL/TLS)wss
The port-separation UDP(HpFP) protocol(deprecated)udp
The WebSocket protocol (plaintext communications)ws
Directly connect to the Proxy server when the WebSocket protocolws-proxy-direct
Set the Proxy server when the WebSocket protocolws-proxy

Congestion Control

DescriptionShort NameOption Name
Congestion control modes in the HpFP protocolhpfp-cong

Data Flow Control, Message Data Size Control

DescriptionShort NameOption Name
MSS(Maximum Segment Size) in the HpFP protocolhpfp-mss

Data Flow Control, Data Buffer Setting

DescriptionShort NameOption Name
Set the sending buffer size for the HpFP protocolhpfp-sndbuf
Set the receiving buffer size for the HpFP protocolhpfp-rcvbuf

Authentication

DescriptionShort NameOption Name
Server certificate checking is disabled in WebSocket protocol communicationswss-no-check-certificate
Specify a username first and showing the current working directoryuser
Specify a password first and showing the current working directorypassword

Various Monitorings

DescriptionShort NameOption Name
Investigation mode starts (deprecated)investigation

Log Management

DescriptionShort NameOption Name
Specify an application log output destinationlog-file
Specify various statistics log output destinationsstat-log-file
Start in the multiple-run modemulti-run

Software Information Update

DescriptionShort NameOption Name
Check the application versionVversion
Check the configuration and input parametersconfig-test
Display the command helphhelp

System Operating Environment Settings

DescriptionShort NameOption Name
Setting form a path of the configuration fileconfig-file
Make configuration from command lineconfig-option
Setting by a relative path from the current directoryinclude-conf-from-cwd
Server compatibility disabledno-earlier-serv-compat

Please refer to the hcpd command section on the following option.

--investigation

Please refer to the hcp command section on the following option.

--hpfp, --wss, --user, --password, --config-file, --config-option, --log-file, --stat-log-file, --udp, --ws, --wss-no-check-certificate, --ws-proxy-direct, --ws-proxy, --hpfp-cong, --hpfp-mss, --hpfp-sndbuf, --hpfp-rcvbuf, --multi-run, --include-conf-from-cwd, --no-earlier-serv-compat

Showing the Current Working Directory#

L, logical#

=========================================================================Supported OS : Linux / WindowsFormat : -L | --logical=========================================================================

The logical path is returned. When neither the logical option nor physical option is set, it is operated as if this option is specified.

--Example:[user@localhost ~]$ hpwd -L ...--

P, physical#

=========================================================================Supported OS : Linux / WindowsFormat : -P | --physical=========================================================================

The physical path is returned. The symbolic links are resolved.

--Example:[user@localhost ~]$ hpwd -P ...--

Software Information Update#

V, version#

=========================================================================Supported OS : Linux / WindowsFormat : -V | --version=========================================================================

The hpwd command version is shown.

--Example:[user@localhost ~]$ hpwd -Vhpwd client (hpwd) 1.3.4_3 / Linux (HpFP2 2.0.0.91_21 WSAPI 0.0.1.30 WS 4.2.0-1)--

config-test#

=========================================================================Supported OS : Linux / WindowsFormat : --config-test=========================================================================

Output the input parameters for the hpwd command and the configuration information.

--Example:[user@localhost ~]$ hpwd --config-test...
Number of Logical Processors  : 2Number of Physical Processors : 2
Command parameters logical      : disable physical         : disable user           : disable password       : disable version        : disable help           : disable

Configuration parameters PubkeyAuthentication             : yes WinLogonUserAuthentication       : yes PAMAuthentication                : yes LocalPasswordAuthentication      : yes CompressLevel                    : -1 StrictHostKeyChecking            : ask PrivateKeyFile                   : - [~/.hcp/id_rsa] TransportTimeout                 : 180 AcceptableCryptMethod            : AES256/GCM AES256/CTR/VMAC AES256/CBC AES128/CBC [Intel:AES-NI=yes] AcceptableDigestMethod           : XXH3 MM128 SHA256 SHA160
Please type '--config-test --config-test ...' for more details.--

h, help#

=========================================================================Supported OS : Linux / WindowsFormat : -h | --help=========================================================================

Show the hpwd command line help.

--Example:[user@localhost ~]$ hpwd -h--