Client Command (hmkdir)
The hmkdir command creates directories on the remote servers (server or hcpd server).
Basic Format#
The basic format is as follows.
Usage: hmkdir [OPTION]... [USER@]HOST[:PORT]:DIRECTORY [:DIRECTORY]... or: hmkdir [OPTION]... --host=HOST [--port=PORT] [--user=USER] DIRECTORY...Option List#
The options for the hmkdir commands are below.
Directory Creating
| Description | Short Name | Option Name |
|---|---|---|
| Set the flag to create parents directory | p | parents |
| Set the remote host | host | |
| Set the remote port | port |
Selectable Communication Method Function
| Description | Short Name | Option Name |
|---|---|---|
| The HpFP protocol | hpfp | |
| The port-separation UDP(HpFP) protocol(deprecated) | udp |
Congestion Control
| Description | Short Name | Option Name |
|---|---|---|
| Congestion control modes in the HpFP protocol | hpfp-cong |
Data Flow Control, Message Data Size Control
| Description | Short Name | Option Name |
|---|---|---|
| MSS(Maximum Segment Size) in the HpFP protocol | hpfp-mss |
Data Flow Control, Data Buffer Setting
| Description | Short Name | Option Name |
|---|---|---|
| Set the sending buffer size for the HpFP protocol | hpfp-sndbuf | |
| Set the receiving buffer size for the HpFP protocol |
Authentication
| Description | Short Name | Option Name |
|---|---|---|
| Specify a username first and directory creating | user | |
| Specify a password first and directory creating | password |
Various Monitorings
| Description | Short Name | Option Name |
|---|---|---|
| Investigation mode starts (deprecated) | investigation |
Log Management
| Description | Short Name | Option Name |
|---|---|---|
| Specify an application log output destination | log-file | |
| Specify various statistics log output destinations | stat-log-file | |
| Specify an execution record output destination | hcp-out | |
| Start in the multiple-run mode | multi-run |
Software Information Update
| Description | Short Name | Option Name |
|---|---|---|
| Check the application version | V | version |
| Check the configuration and input parameters | config-test | |
| Display the command help | h | help |
System Operating Environment Settings
| Description | Short Name | Option Name |
|---|---|---|
| Setting form a path of the configuration file | config-file | |
| Make configuration from command line | config-option |
Please refer to the hcpd command section on the following option.
--investigationPlease refer to the hcp command section on the following option.
--hpfp, --user, --password, --config-file, --config-option, --log-file, --stat-log-file, --udp, --hpfp-cong, --hpfp-mss, --hpfp-sndbuf, --hpfp-rcvbuf, --multi-runDirectory Creating#
p, parents#
=========================================================================Supported OS : Linux / WindowsFormat : -p | --parents=========================================================================If the parents directory is not found in the indicated path, the parent directory is also automatically created. Without this option, errors will happens when the parent directory dose not exist.
--Example:[user@localhost ~]$ hmkdir -p ...--host#
=========================================================================Supported OS : Linux / WindowsFormat : --host=<remote-host>-------------------------------------------------------------------------remote-hostDefault : noneRange of Values : IP address or host name=========================================================================The destination remote host is specified, which is applied to the path for the listed target. With this parameter, the host name can be abbreviated.
--Example:[user@localhost ~]$ hmkdir --host=192.168.100.100--port#
=========================================================================Supported OS : Linux / WindowsFormat : --port=<remote-port>-------------------------------------------------------------------------remote-portDefault : noneRange of Values : port number=========================================================================The destination remote port is specified, which is applied to the path for the listed target.
--Example:[user@localhost ~]$ hmkdir --port=1874--Log Management#
hcp-out#
=========================================================================Supported OS : Linux / WindowsFormat : --hcp-out=<output-path>-------------------------------------------------------------------------output-pathDefault : noneRange of Values : path string of file system=========================================================================The file to output the execution record of creating directories is set.
--Example:[user@localhost ~]$ hmkdir --hcp-out=- ...DIR0 127.0.0.1:1874:/home/user/Desktop/hcp_mkdir14DIR1 127.0.0.1:1874:/home/user/Desktop/hcp_mkdir15OK 0000 DC 00000001 /home/user/Desktop/hcp_mkdir14OK 0000 DC 00000002 /home/user/Desktop/hcp_mkdir15EXIT 0 REASON 0000[user@localhost ~]$ --
--Example:[user@localhost ~]$ hmkdir --hcp-out=- ...--Software Information Update#
V, version#
=========================================================================Supported OS : Linux / WindowsFormat : -V | --version=========================================================================Show the hmkdir command version.
--Example:[user@localhost ~]$ hmkdir -Vhmkdir client (hmkdir) 1.2.11_7 / Linux (HpFP2 2.0.0.91_21)--config-test#
=========================================================================Supported OS : Linux / WindowsFormat : --config-test=========================================================================Display the input parameters for the hmkdir command and the configuration information.
--Example:[user@localhost ~]$ hmkdir --config-test...
Number of Logical Processors : 2Number of Physical Processors : 2
Command parameters parents : disable host : disable port : disable hpfp : disable (TCP used) version : disable config-test : enable help : disable user : disable password : disable config-file : disable log-file : disable stat-log-file : disable hcp-out : - [.hcp.out] multi-run : disable no-earlier-serv-compat : disable
Configuration parameters PubkeyAuthentication : yes WinLogonUserAuthentication : yes PAMAuthentication : yes LocalPasswordAuthentication : yes RequireServerCertificateSecurity : yes RejectFallbackServerCertificateSecurity : yes IgnoreCertificateCNInvalid : yes IgnoreCertificateDateInvalid : no IgnoreUnknownCA : no IgnoreRevocation : no CompressLevel : -1 HeaderCompress : yes ContentCompress : yes OCSPRevocationEnabled : yes StrictHostKeyChecking : ask ApplicationStatLog : yes Rotation[size=no:0:0, pattern=no:] TransportStatLog : no Rotation[size=no:0:0, pattern=no:] PrivateKeySearchDir : - [/etc/hcp/keys] PrivateKeyFile : - [~/.hcp/id_rsa] CACertificateFile : - [/etc/hcp/cacert.pem] CACertificatePath : - CARevocationFile : - [/etc/hcp/crl.pem] CARevocationPath : - ProtocolVersion : 2 MaxConcurrentThread : 0 UDPTransportExtensionBufferSize : 2147483648 MaxRequestFileEntryAtOnce : 50 MaxReceiveFileSize : unlimited MaxSendFileSize : unlimited MaxBufferSize : 1073741824 MaxReceiveRate : 10000000000 MaxSendRate : 10000000000 InitHeaderBlockSize : 51200 InitContentBlockSize : 51200 MaxHeaderBlockSize : 51200 MaxContentBlockSize : 51200 TransportTimeout : 180 FileLock : no FileLockTrials : 0 FileLockTrialInterval : 3 AcceptableCryptMethod : AES256/GCM AES256/CTR/VMAC AES256/CBC AES128/CBC [Intel:AES-NI=yes] AcceptableDigestMethod : XXH3 SHA256 SHA160 DisableDataIntegrityChecking : no AcceptDataIntegrityCheckingOnRejection : yes TransportCharEncoding : UTF8 HostEncoding : UTF8 ApplicationLog : INFO no Rotation[size=no:0:0, pattern=no:] PubkeyAuthenticationPrior : yes ApplicationStatLogSecurityEx : yes--h, help#
=========================================================================Supported OS : Linux / WindowsFormat : -h | --help=========================================================================Show the hmkdir command line help.
--Example:[user@localhost ~]$ hmkdir -h--