Client Command (hpwd)

The hpwd command shows working directories on the remote server (server or hcpd server).

Basic Format

The basic format is as follows.

Usage: hpwd [OPTION]... [USER@]HOST[:PORT]

Option List

The options for the hpwd commands are below.

Showing the Current Working Directory

Description	Short Name	Option Name
Logical path	L	logical
Physical path	P	physical

Selectable Communication Method Function

Description	Short Name	Option Name
The HpFP protocol		hpfp
The port-separation UDP(HpFP) protocol(deprecated)		udp

Congestion Control

Description	Short Name	Option Name
Congestion control modes in the HpFP protocol		hpfp-cong

Data Flow Control, Message Data Size Control

Description	Short Name	Option Name
MSS(Maximum Segment Size) in the HpFP protocol		hpfp-mss

Data Flow Control, Data Buffer Setting

Description	Short Name	Option Name
Set the sending buffer size for the HpFP protocol		hpfp-sndbuf
Set the receiving buffer size for the HpFP protocol		hpfp-rcvbuf

Authentication

Description	Short Name	Option Name
Specify a username first and showing the current working directory		user
Specify a password first and showing the current working directory		password

Various Monitorings

Description	Short Name	Option Name
Investigation mode starts (deprecated)		investigation

Log Management

Description	Short Name	Option Name
Specify an application log output destination		log-file
Specify various statistics log output destinations		stat-log-file
Start in the multiple-run mode		multi-run

Software Information Update

Description	Short Name	Option Name
Check the application version	V	version
Check the configuration and input parameters		config-test
Display the command help	h	help

System Operating Environment Settings

Description	Short Name	Option Name
Setting form a path of the configuration file		config-file
Make configuration from command line		config-option

Please refer to the hcpd command section on the following option.

--investigation

Please refer to the hcp command section on the following option.

--hpfp, --user, --password, --config-file, --config-option, --log-file, --stat-log-file, --udp, --hpfp-cong, --hpfp-mss, --hpfp-sndbuf, --hpfp-rcvbuf, --hcp-out, --multi-run

Showing the Current Working Directory

L, logical

=========================================================================Supported OS : Linux / WindowsFormat : -L | --logical=========================================================================

The logical path is returned.

--Example:[user@localhost ~]$ hpwd -L ...--

P, physical

=========================================================================Supported OS : Linux / WindowsFormat : -P | --physical=========================================================================

The physical path is returned. The symbolic links are resolved. When neither the logical option nor physical option is set, it is operated as if this option is specified.

--Example:[user@localhost ~]$ hpwd -P ...--

Software Information Update

V, version

=========================================================================Supported OS : Linux / WindowsFormat : -V | --version=========================================================================

The hpwd command version is shown.

--Example:[user@localhost ~]$ hpwd -Vhpwd client (hpwd) 1.2.11_7 / Linux (HpFP2 2.0.0.91_21)--

config-test

=========================================================================Supported OS : Linux / WindowsFormat : --config-test=========================================================================

Output the input parameters for the hpwd command and the configuration information.

--Example:[user@localhost ~]$ hpwd --config-test...
Number of Logical Processors  : 2Number of Physical Processors : 2
Command parameters logical      : disable physical         : enable (implicit) hpfp            : disable (TCP used) version        : disable config-test      : enable help           : disable user           : disable password       : disable config-file     : disable log-file        : disable stat-log-file          : disable hcp-out        : - [.hcp.out] multi-run        : disable no-earlier-serv-compat : disable

Configuration parameters PubkeyAuthentication             : yes WinLogonUserAuthentication       : yes PAMAuthentication                : yes LocalPasswordAuthentication      : yes RequireServerCertificateSecurity : yes RejectFallbackServerCertificateSecurity : yes IgnoreCertificateCNInvalid       : yes IgnoreCertificateDateInvalid     : no IgnoreUnknownCA                  : no IgnoreRevocation                 : no CompressLevel                    : -1 HeaderCompress                   : yes ContentCompress                  : yes OCSPRevocationEnabled            : yes StrictHostKeyChecking            : ask ApplicationStatLog               : yes Rotation[size=no:0:0, pattern=no:] TransportStatLog                 : no Rotation[size=no:0:0, pattern=no:] PrivateKeySearchDir              : - [/etc/hcp/keys] PrivateKeyFile                   : - [~/.hcp/id_rsa] CACertificateFile                : - [/etc/hcp/cacert.pem] CACertificatePath                : - CARevocationFile                 : - [/etc/hcp/crl.pem] CARevocationPath                 : - ProtocolVersion                  : 2 MaxConcurrentThread              : 0 UDPTransportExtensionBufferSize  : 2147483648 MaxRequestFileEntryAtOnce        : 50 MaxReceiveFileSize               : unlimited MaxSendFileSize                  : unlimited MaxBufferSize                    : 1073741824 MaxReceiveRate                   : 10000000000 MaxSendRate                      : 10000000000 InitHeaderBlockSize              : 51200 InitContentBlockSize             : 51200 MaxHeaderBlockSize               : 51200 MaxContentBlockSize              : 51200 TransportTimeout                 : 180 FileLock                         : no FileLockTrials                   : 0 FileLockTrialInterval            : 3 AcceptableCryptMethod            : AES256/GCM AES256/CTR/VMAC AES256/CBC AES128/CBC [Intel:AES-NI=yes] AcceptableDigestMethod           : XXH3 SHA256 SHA160 DisableDataIntegrityChecking     : no AcceptDataIntegrityCheckingOnRejection : yes TransportCharEncoding            : UTF8 HostEncoding                     : UTF8 ApplicationLog                   : INFO no Rotation[size=no:0:0, pattern=no:] PubkeyAuthenticationPrior        : yes ApplicationStatLogSecurityEx     : yes--

h, help

=========================================================================Supported OS : Linux / WindowsFormat : -h | --help=========================================================================

Show the hpwd command line help.

--Example:[user@localhost ~]$ hpwd -h--